usha MG 3563, Instruction Manual

Page: 6 / 12

• Please rotate the motor shaft by hand through the motor coupler. The
Motor shaft should be free to rotate. Check speed selector is in OFF
Position. Connect mains plug to wall socket after fixing jar. Switch on
main Supply & turn selector knob to required position and speed. After
operation, turn selector knob OFF and check. Repeat till desired results
are obtained.
• For blending / liquidizing / pureeing use 'whip 'on speed knob. This will
activate the whipping till you release the button.
• Hold down the Jar lid gently while your Mixer Grinder is in operation.
• After switching OFF the Mixer Grinder, wait till the blade stops rotating
completely and only then remove lid or put in the spatula.
• Before removing the jar, ensure that power supply is disconnected.
• Avoid using your hand for filling or cleaning out jars. It is safe and more hygienic to use
the spatula.
• Avoid storing food in Jar.
• Never place plastic or cloth under the mixer grinder it may block the ventilation holes.
HOW TO USE BLENDER / MIXER JAR
(Only for MG 3775).
Hold blender / mixer jar and check if the blade assembly moves
freely and rotates.
Put ingredients into blender / mixer jar and lock jar cover. Place
jar on basic unit and turn the lower socket clockwise to lock with
the body lock. Plug in and choose appropriate speed for mixing.
It is advisable to start the mixer at the lower speed (position 1)
and step on to higher speeds (position 2, 3).
For whipping frothy lassi and milk shakes use the 'pulse' switch after blending is done. After
using, switch off and remove blender / mixer jar. Remove ingredients.
USES
1. Whipping lassi, frothy cold coffee, fluffy omelette, fresh cream, butter churning and
mayonnaise.
2. For making chutneys.
3. Juicing in Blender jar with Fruit filter. Recommended for juicing for grapes,
watermelon, muskmelon, sweet lime, oranges, anar, lichi, tomatoes.
4. Liquidising for fruit juice, soups, milk shakes with fresh fruits etc.
SPECIAL INSTRUCTIONS FOR USING FRUIT FILTER.
1. Place the fruit filter inside the blender jar such that its four clots fit into the four ribs
inside the blending jar.
2. Press it down so that it is fixed properly.
3. Fruits should be cut into small pieces before putting inside the fruit filter for extracting
juice.
4. Close the jar lid.
5. Initially use low speed and then
speed can be increased.
6. After juicing is done, pour the
contents into a glass.