3 Cooktop
Cooktop 4
KNOW YOUR COOKTOP
DESCRIPTION OF PARTS
INSTALLATION
•
Unpack the cook top and remove all the packing material.
•
Check and ensure that all the burner and pan support are in the position and seated properly.
•
The gas control knob should be in OFF position at the time of installation.
•
The cooktop should be placed at a convenient working height against a wall. It should be kept
away from shelves and curtains.
•
Windows should not be closed and use of fan should be avoided during its operations.
•
In case of PNG connection, ensure the minimum gas pressure is at 21 milibar in all 3 burners(when
in switched ON position).
Note:
•
Do not use a vinyl plastic tube or tube with metallic cover, as this can be dangerous. It is suggested
that only steel reinforced specially designed rubber hose to be used. Rubber hose should be
supplied by Gas company providing LPG / PNG Gas connection. The tube should not be twisted,
looped or kinked, or subjected to external pressure of any kind.
•
Push the rubber hose onto the nozzle as far as it will go.
•
The tube is not be extended from one room to another and must not be passed through doors
windows, walls, partition, ceilings or floors.
•
After the hose is fixed, the Cook top is ready to use.
•
In case you find difficulty in assembling the Cook top, please call nearest USHA Service center
Other Instruction for Use:
•
The Gas Cylinder should always be in vertical position, while in use.
•
To turn the Cook Top “ON” : (for Non-Auto ignition models)
o First open the gas regulator. Light a match stick over the operating burner, while
simultaneously turning the operating knob towards “ON” position.
o The burners may not ignite the first time you use them. This may be due to the result of air
in the gas tube. Turn the gas control knob back to the “OFF” position and try again until
burner ignites.
•
To Turn the Cook Top “ON” (for auto ignition models)
o First open the gas regulator. Turn the ignition knob towards the ON position. A click sound
will come and burner will ignite WITHOUT use of any match stick etc.
o The burner’s may not ignite at the first click, if used after along gap of time. This is because
the gas in the pilot line take a little time to flow and ignite the flame.
o To ensure lighting press the knob, hold for a second and then turn the knob to “ON” position.
o Always make sure that gas stove is lit when the knob is turned to “ON/SIM” position.
Otherwise the gas will be leaking and can be Dangerous.
o If the gas stove does not get lit, bring the knob to “OFF” position and repeat until the gas
stove lights.
•
Use the cook top for cooking purpose only. Do not dry towels, clothes etc. over it.
•
When using high flame, ensure that you use large sized vessels to covers the entire flame to avoid
wastage of gas.
NOTE:
The above illustration is only for indication and may not be same in the product. Design, shape and
components will may vary for two burner, three burner & four burner models. In pursuence with our
policy of continous product improvement, specification are subject to change without notice.
OPERATING INSTRUCTIONS
Gas Control Knobs
Drip
Tray
Brass Burner
Toughened Glass Top
Gas Tube Connecter
Pan Support
Legs
