9 Induction Cooktop
TROUBLESHOOTING
Abnormalities
Key checking points and trouble shooting
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord damaged?
After plugging in the power cord and
pressing the “ON/OFF” key, the
indicator and display do not light up.
Is the pot material proper?
Is the appliance in a “Preset” working status?
For other causes, please take the appliance to a service
centre to be fixed.
The “ON/OFF” indicator lights up and
the display works normally, but
heating does not start.
Is the temperature of the oil too high when frying dishes?
Is the temperature of the surroundings very high?
Is the air inlet or air outlet of the induction cooktop
blocked?
Is the default heating time of the induction cooktop over?
The self-safety protection of the induction cooktop starts,
wait for several minutes and connect power to use it.
Heating suddenly stops during the
process.
Size:148x210mm (A5)
If the error code E0 is reported, please check if the
cookware you are using is suitable for induction cooking or
wait for the appliance to cool down and then switch it on
again.
Check for proper Voltage.
Check for proper Voltage.
Contact service center.
Please wait for the appliance to cool down and then switch
on Induction Cooktop again.
Code of
failure
E0
E1
E2
E3 - E7
E8 - E9
