14
DRAINING AND CLEANING THE WATER TANK
• Turn the power “off” and disconnect the air cooler from the power supply.
• Move the unit to a location where it can be drained. Remove the cap from the
water drain plug and allow the tank to empty (see parts description on page 9).
• After you have drained the water tank, please connect the water drain plug to its
original position.
• Now refill the water tank up to Max level, wait for 5 min. and then drain the entire
water once again. Use clean water for this procedure, so that maximum dust
particles and remains are completely removed.
• If your cooler has not been used for a long duration, we advise you to clean the
water tank at least 2 times before it is used again.
CLEANING THE HONEYCOMB MEDIA
• Turn off the unit, and unplug the power cord from wall outlet Rotate the unit
facing the back panel, and locate the Rear Grill
• Removal Screws (refer page 7., #15). Remove the screws with a screw driver.
• Pull the rear grill panel upwards, until it is completely removed. Now, the
honeycomb media can be seen. Clean the honeycomb media with fresh water.
• Once the cleaning has been completed, assemble the unit as described above.
• Plug into the power supply and turn unit on.
CLEANING & MAINTENANCE
WATER DRAIN PLUG
OPEN SCREWS
