13
IMPORTANT
• The cooler is supplied with Honeycomb Cooling Media.
• The cleaning frequency for the Honeycomb media depends on local air and
water conditions. In areas where the mineral content of water is high, mineral
deposits may build up on the Honeycomb Cooling Media and restrict air flow.
Draining the water reservoir and refilling with fresh water at least once a week
will help reduce mineral deposits. If mineral deposits remain on the Honeycomb
media, the media should be removed and washed under fresh water. The media
should be cleaned every two months or sooner, depending on your needs.
Do not run the unit in COOL mode with stale water in the tank. Empty the tank
and refill it with fresh water if the water has been standing in the tank for an
extended period of time.
• For best results, allow the Honeycomb Cooling Media to dry after each use by
turning off the cool function 15 minutes before turning the unit off.
• Draining the water reservoir and refilling with fresh water at least once a week
will greatly reduce mineral deposits in the pads and help to extend the life of
Honeycomb Cooling Media
WARNING
• Before cleaning the unit, switch it to the “off’’ position and remove the plug from
the power socket.
• To clean the outside, use a damp cloth to remove dirt and dust.
• Never use corrosive elements or any chemicals to clean this product.
• When the product is not in use, store the unit in a dry place out of direct sunlight.
• Maximum water inlet pressure 0.5MPa
CLEANING & MAINTENANCE
