ZenCut Black User Manua
l
Trouble Shooting 7-2
7.2 Operational Problems
Some mechanical problems or failure during operation will result in an error message. When
you get an error message, please follow the recommended actions. If the problem still exists
after the recommended actions have been attempted, have your cutting plotter serviced.
This message indicates that there might be a
problem on the
X axis
. Check if the drum is
working well and if the media is properly
loaded. Correct the problem and re-power on
to reboot system.
Error, Check Media
Or Drum or X Motor
This message indicates that there might be
an obstruction to carriage relating to a
problem on the
Y axis
. Correct the problem
and re-power on to reboot system
.
Error, Check Media
Or Y Motor
This message indicates that there is a blade
up/down sensor malfunction. Re-power on to
reboot system. If the problem still persists,
contact your dealer.
Error, Check Carriage
Sensor or VC Motor
This message indicates that the design
exceeds the cutting limit. Reload larger media
or re-scale the design to a smaller size; then
press the key followed by the display of LCM
to continue.
Graph Was Clipped.
Data In Buffer
7.3 Cutting Plotter/Computer Communication Problems
Summary of Contents for ZENCUT Black
Page 1: ...V1 June 09 User Manual...
