ZenCut Black User Manual
Accu-Aligning System
5-4
Command:
Esc.D3;(XCopies);(YCopies);(Space):
Layout:
Condition 1 (Default) Condition 2
5.3 Printer
Test
Before performing AAS contour cutting, it’s recommended that you print out a test file.
You can find in the enclosed User CD.
There are two testing files for AASII:
1. AAS II_X_Y_Offset_Caberation_A4 .eps (A4 size)
2. AAS II_X_Y_Offset_Caberation_600_600 .eps (Default setting is recommended for
testing)
Print out the testing graphic. (Please use printer capable of printing high
resolution graphics.)
Load the graphic to ZenCut Black and send the file to test the cutting job.
If there are any adjustments to be made, you can change the offset value by
following the steps:
•
Measure the offset values from the printed line and the actual cutting line.
•
Enter the AAS Offset under MISC function for the values you just measured,
then press Enter
•
Test the cutting again
•
AAS II offset X and Y value is defined as following:
Horizontal line is defined as X and vertical is defined as Y
Summary of Contents for ZENCUT Black
Page 1: ...V1 June 09 User Manual...
