Troubleshooting
1.) LED is not lit, or it is lit dimly, please disconnect the transceivers and then
reconnect them. This will help determine if something just has a bad
connection. If that doesn’t work, then try a different Cat5e or Cat 6 cable.
2.) LED is not lit: You don’t have enough power. Make sure that you have a
powered connection on the host (computer) side. If not, please connect
the optional power adapter
3.) Eliminate the RJ45 crossover adapter: You’re free to use any standard RJ45
Crossover Cable. This effectively eliminates the need for the RJ45 crossover
adapter that’s provided in the box.
4.) LED is slightly lit, but flashing rapidly: The cable you’re using may be too
long. Try using a shorter Cat5e or Cat 6 cable.
Setup diagram
