USB XY-UMPD, Manual

Page: 13 / 17

声明：本说明书著作权归青岛欣易云联电子科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
Quick charge detection interface:
Short press the 'set' button to start automatic detection, and the corresponding protocol
will start flashing. After the detection, if it is supported, it will turn green, if it is not
supported, it will turn red.
Quick charge activation interface:
Press the "set" key briefly to select the protocol to be activated on the left side, and press
the "up / down" key to switch the protocol to be activated. After selection, press the "set"
key again to activate the selected fast charging protocol. The protocol content will be
displayed in the right column. If the activation is successful, the "OK" will be displayed. If
the activation is successful, the "fal" will be displayed. After the activation is successful, the