4. CONFIGURATION SCREEN
Once you have passed the opening port screen, you will see the configuration screen.
This allows you to setup your 3-Position Function Switch. Use the dropdown lists to see
the choices available for each switch position. F1 stands for Frequency 1 and F2 stands
for Frequency 2
. Both F1 and F2 are set from the pager’s front panel menu. With
WatchDog firmware version 5.20 or later, both F1 and F2 can be set to any of the
available channels on your pager (channels 1, 2, 3, 4 or 5).
Note:
to determine the firmware version of your pager, first turn the pager off. Hold down
the top-mounted reset button and turn the pager on. The firmware version will appear on
the pager’s display.
3-Position Function Switch Selections
F1 Tone Alert -
Position will audibly alert when paged on any address for Frequency 1. If
the volume knob is turned all the way down, the pager will not audibly alert.
F1 Vibrate Alert -
Position will alert by vibration when paged on Frequency 1, regardless
of where the volume control knob is set.
