Capacities:
Maximum load: 500 KG.
Min width: 60 cm
Max width: 160 cm
WARNINGS
Use the engine support 1954 B only to maintain the power unit of an automobile vehicle in
normal position when removing a single engine or gearbox support.
Before use, always check the recommendations of the vehicle manufacturer.
Check that the engine support 1954 B can be used safely.
Always use the engine support 1954 B with the vehicle flat.
Only skilled professionals may use engine supports such as the 1954 B.
Do not modify the engine support 1954 B.
Lack of compliance with the car manufacturer instructions or the instruction manual of the 1954
B may cause severe accidents or major damage to vehicles.
USE
Fit the engine support. Place the pads on a strong zone on both
sides of the vehicle.
Tighten securely the knobs on either side and check that the pad
fastening bolts on the cross-piece are tight enough.
Check that the assembly is stable. Otherwise do not use the
engine support 1954 B
Fasten the engine using one or both pairs of adjustable hooks.
Use the fastening eyes included to handle the engine.
Opening
EN
