50
PATTERN TOUR
MAIN MENU
LANGUAGE: ENGLISH
<SYSTEM
INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
<CAMERA>
<MOTION>
RESTART
FACTORY DEFAULTS
EXIT
MOTION
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<MOTION DETECT>
<AUTO TRACKING>
BACK EXIT
PATTERN
PATTERN NO. :1
TITLE: PATTERN 1
START
<SET>
DELETE
BACK EXIT
The dome supports 4 pattern tours and each pattern cover at most 10
Minutes of 500 commands. Please check the following steps to set up
a pattern.
1)
PATTERN NO.:
Move the cursor here and click IRIS + to
enter the setup of Pattern Number. Click the up or down button
to select a pattern number (14) and click IRIS + to confirm.
2)
TITLE:
Move the cursor here and click IRIS + to enter the
setup of Pattern Title .Check the detailed above in DOME
TITLE settings.
3)
<SET>:
Move the cursor here and click IRIS + to enter. Click
the dome up/down/left/right, make the zoom in/out and click
IRIS + to save the pattern tour.
4)
START:
Move the cursor here and click IRIS + to start the
current pattern tour.
5)
DELETE:
Move the cursor here and click IRIS + to delete the
current pattern tour.
