USA Measurements US-PC-PH-15, User'S & Technical Manual

Page: 13 / 24

US-PC-PH & US-PC-PL .
11 .
display window shows “SETUP”, UNIT PRICE window shows "BLGt.Md" (backlight mode) and the TOTAL PRICE window
shows the backlight mode code x(x=1-3), use the numerical keys to input the backlight mode, and press ENTER key
for confirmation.
Press ON/OFF key to exit this mode and the scale will automatically reset.
x=1 – back light is always off
=2 – back light is always on
=3 –Backlight On Request (backlight temporarily switches off after 15 seconds of inactivity, and
reactivates with a key press or with an item placed on or removed off the pan)
2. When UNIT PRICE window shows “LCd.CST” (LCD contrast) and the TOTAL PRICE window shows the contrast level x
(x=1-9,default is 9). Use the numerical keys to input the contrast level, and press ENTER key for confirmation.
Press ON/OFF key to exit this mode and scale will automatically reset.
6.
6. 6.
6. Auto
Auto Auto
Auto----off time setting
off time setting off time setting
off time setting
Under the normal weighing mode, press and hold ON/OFF and 2 key at the same time until the scale displays “SETUP” in
WEIGHT window, “A.OFF.t” (auto off time) in UNIT PRICE window and auto-off time xx (xx=00 ～ 30, when 00 is used that
means no auto off function) in TOTAL PRICE window. Use numerical keys to input the auto-off time and press Enter key
for confirmation. Press ON/OFF key to exit this mode and the scale will automatically reset.
7.
7. 7.
7. Display A/D i
Display A/D i Display A/D i
Display A/D inner code and working voltage
nner code and working voltage nner code and working voltage
nner code and working voltage
When in normal working mode, press ON/OFF and 3 key at the same time till the UNIT PRICE window shows “CodE 2” to
enter this mode. Now WEIGHT window will show “UoL.x.x” (Voltage x.x V), this means the inner working voltage is x.x V. If
the scale uses AC power adaptor, the voltage is the power adaptor voltage after regulating. If AC adaptor is not used, this
around voltage is battery’s voltage. A/D internal code will be displayed in TOTAL PRICE.
8. 8. 8. 8. The details about RS232 commun The details about RS232 commun The details about RS232 commun The details about RS232 communication ication ication ication
1. Under the normal working mode, press and hold ON/OFF key and 4 key at the same time until the WEIGHT window
shows “SETUP” . Under this mode, you can set the RS232 baud rate, data format and communication format.
2. After entering into this mode, the weight window will show “Setup”, the UNIT PRICE window will show “232.oUt”
(RS232 output
content format) and the TOTAL PRICE window shows one of following content:
2.1 HOST
HOST HOST
HOST (US-PC-PH/PL-xxxx is connected with host device, e.g. a PC)
2.2 P
PP
Prtd
rtd rtd
rtd40
40 40
40 (US-PC-PH/PL-xxxx is connected with the OS-2130D, label dimension is 58mm × 40mm, date will be
printed on label)
2.3 P
PP
Prtd
rtd rtd
rtd60
60 60
60 (US-PC-PH/PL-xxxx is connected with the OS-2130D, label dimension is 58mm × 60mm, date will be
printed on label)
2.4 P
PP
PrtNd
rtNd rtNd
rtNd4
4 4
4 (US-PC-PH/PL-xxxx is connected with OS-2130D, label dimension is 58mm × 40mm, no date will be
printed on label)
2.5 P
PP
Prt
rt rt
rtNd6
Nd6 Nd6
Nd6 (US-PC-PH/PL-xxxx is connected with the 2130D, label dimension is 58mm × 60mm, no date will be
printed on label)
Use numerical keys 0
00
0,1,2,3,4
,1,2,3,4 ,1,2,3,4
,1,2,3,4 to choose RS232 output content format (0-HOST, 1- P
PP
Prtd
rtd rtd
rtd40
40 40
40, 2- P
PP
Prtd
rtd rtd
rtd60
60 60
60, 3- P
PP
PrtNd
rtNd rtNd
rtNd4
44
4,