6
Section 1 | Important Information
1.1 Safety Notices
USE ETHANOL or DYNALENE XLT 2 (XLT 120)
* USA Lab is not responsible for any loss or harm incurred by using any transfer fluid *
(See section 4.2)
The use of Personal Protection Equipment (PPE) is REQUIRED.
Follow all federal, state, and municipal laws, codes, and ordinances.
Please make sure the power connection is correct and well-grounded. (See section 1.3)
Fluid lines should be unobstructed without any hard bends in the run.
Apply a rag to wipe the parts clean after washing away stains; do not use hard objects.
Do not use near sources of heat or open flames.
Do not run the liquid pump dry, allow plenty of time to prime the pump.
The compressor imposes a 5-minute cool down before it will start. After each power cycle.
Do not allow the compressor to cycle more than 5 times per day.
Do not unplug the unit while it is running.
Install the equipment in a climate-controlled facility ONLY. (60°F to 80°F)
Never use a generator to power this equipment.
Do not change the length of the power cable.
Repairs must be made by USA Lab or by instruction from USA Lab.
If there is a problem, do not continue to use the chiller.
Contact us immediately.
Open Hours:
By Phone: (734) 855-4890 Ask to speak with a technician.
By Email: [email protected]
After-Hours:
By Email: [email protected]
