15
c.
Door Moldings –
Use
the
1-inch nylon bristle round brush with the 1-hole nozzle. Use separate
towel to mop up loosened dirt.
d.
Defrosting Freezer –
Use
the
1-inch nylon bristle round brush with the 1-hole nozzle on low or
medium steam. Use separate towel to mop up water.
Dishwasher
–
Use the 1-hole nozzle (Item 7) on low or medium steam to clean out corners and edges.
For light scrubbing, add the 1-inch round nylon brush. For larger surfaces, use the 3-inch round or
small triangle brush with 3-hole nozzle, using back and forth movements over area being cleaned.
Wipe clean with a spare cotton towel.
BATHROOM
Mirrors/Glass/Windows
–
Use the large triangular brush (Item 3) with a bonnet or the window
squeegee tool (Item 10) on the
LOW
steam setting. Use extension wands to extend your reach if
needed. Follow up if necessary by turning off steam and re-squeegee window, wipe with lint free
microfiber cloth.
CAUTION:
DO NOT USE THE BRUSH IN A CONCENTRATED AREA FOR MORE THAN TWO
OR THREE SECONDS, GLASS COULD BREAK.
CAUTION!
ALWAYS PREHEAT GLASS WITH THE SQUEEGEE 2-3 INCHES FROM SURFACE
BEFORE CLEANING! DO NOT CLEAN GLASS WHEN TEMPERATURES ARE BELOW
FREEZING POINT! NEVER CLEAN A GLASS THAT HAS A CRACK!
Toilet
Exterior
cleaning use the small triangular brush (Item 4) with the 3-hole nozzle on low or medium
steam.
Interior
cleaning use
the
1” nylon round brush (Item 8) with the 1-hole nozzle
for cleaning on low or
medium steam. Start from the top of the toilet and work down to the base.
Be sure to clean the floor up to 2 feet around the toilet to kill odor-causing bacteria.
DO NOT PUT THE BRUSH OR HOSE HANDLE UNDER WATER.
Faucets –
Use
the
3-inch nylon round brush (Item 5) or small triangular brush (Item 4) with the 3-hole
nozzle on low steam. Wipe dry with a microfiber towel as you go.
Bathtub/Shower
a. Fiberglass
–
Pre-spray the area with heat activated Vapormate®. Use on low or medium steam
settings. For crevices use the small triangular brush (Item 4) with the triple nozzle without towel
attached to the hose handle and wipe up the released dirt with a spare cotton towel as you go. Use
large triangle brush (Item 3) with bonnet on walls of tubs.
b. Ceramic
–
Use the large triangular brush with a bonnet. Use on low steam setting to avoid
scratching surface. Use extension wands if you need to extend your reach.
c. Shower door –
Use the large triangle brush with a bonnet on the low steam setting. Wipe
surface dry with a spare cotton or microfiber towel as you go. Lightly applying Vapormate® assists
in naturally removing mineral deposits or soap scum.
CAUTION:
DO NOT USE THE BRUSH IN A CONCENTRATED AREA FOR MORE THAN
TWO OR THREE SECONDS, GLASS COULD BREAK.
d. Tile Grout –
Use
the
1-inch nylon round brush (Item 8) with the 1-hole nozzle on low or medium
steam. Pre-spraying the grout crevices with heat activated Vapormate® to help loosen dirt before
applying steam. Wipe with a spare cotton towel as you go.
e. Silicone Sealant
–
Use the 1-hole nozzle on low or medium steam, no closer than one-inch, use
back and forth movement blowing out debris.
Summary of Contents for RavenUS2100
Page 2: ...2 7 95 21 50...