US Robotics USR8700, Quick Installation Manual

Page: 14 / 36

English
14
When you click Next, the Network Settings page appears:
5. By default, if your network has a DHCP server, the storage system obtains an IP address automatically
from that server.
If your network does not have a DHCP server, the default IP address and subnet mask are used. (The
default IP address is 192.168.0.101, and the default subnet mask is 255.255.255.0).
To accept the default settings, click Next . Otherwise, specify the desired settings and then click Next .
The Disk Configuration page appears. The options that appear on this page vary depending on the
number of hard disks that are currently installed in the system.
6. Select the configuration that you chose from the table on page 7 and click Next .