3
U.S. Robotics Wireless
MAX
g Bridge
Installation
Package Contents:
Prepare for installation
For Bridge mode, you must be using a wireless router or access point that supports WDS
(Wireless Distribution System). If you select Bridge mode, you will be able to select either WPA
PSK (AES), WPA PSK (TKIP), WEP Open, or WEP Shared for the encryption method. If you select
Infrastructure mode, you will be able to select either WPA2 PSK (AES), WPA2 PSK (TKIP), WPA PSK
(AES), WPA PSK (TKIP), WEP Open, or WEP Shared for the encryption method. If you select Ad hoc,
you will only be able to select either WEP Open or WEP Shared for the encryption method.
You must have administrator rights on your computer in order to install this product.
Be sure to find out what letter your CD-ROM drive uses before you begin installing your new prod-
uct. You will need to know this to install your software.
Connecting the Wireless
MAX
g Bridge
Note:
For the most updated information, visit:
http://www.usr.com/support/
.
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more
detailed information.
Step One: Connect the Wireless
MAX
g Bridge
Note:
Look at the label on the bottom of the Wireless
MAX
g Bridge and write down the
LAN MAC address listed before you physically place the Wireless
MAX
g Bridge. You will
need this for future reference.
A.
Connect the antenna to the Wireless
MAX
g Bridge.
USR5432 Wireless
MAX
g Bridge
5VDC power supply
Quick Installation Guide
Installation CD-ROM which includes User Guide
One (1) Ethernet cable
Detachable antenna
A
Wireless
MAX
g Bridge
