US Robotics USR2410, Reference Manual

Page: 3 / 12

5 4
Hardware and Driver Installation
Step One: Prepare for installation
Unplug your computer and remove the computer’s cover.
Step Two: Connect the Wireless Access PCI Adapter to
your computer
Locate an available PCI slot and insert the Wireless Access PCI Adapter.
PCI slots are typically white plastic lined with metal and are 3.5 inches
long. Use the slot cover screw to secure the Wireless Access PCI Adapter.
Note: It can be tricky getting the Wireless Access PCI Adapter into the PCI slot.
Use firm pressure to seat the Wireless Access PCI Adapter properly.
Some computers require you to remove the PC Card from the Wireless
Access PCI Adapter before you insert the Wireless Access PCI Adapter into
the PCI slot. If necessary, pull the PC Card out of the Wireless Access PCI
Adapter and set it aside. Insert the Wireless Access PCI Adapter into the
PCI slot, pressing firmly to seat it properly. Then slide the PC Card through
the slot and into the Wireless Access PCI Adapter. Inserting the PC Card
into the Wireless Access PCI Adapter in this manner can be awkward, so
take your time.
Note: If you experience any problems installing the Wireless Access PCI
Adapter, try installing it in a different PCI slot.
Step Three: Install your drivers
Replace your computer’s cover and turn on your desktop computer. You
may get a window saying the Configuration Agent couldn’t connect to
the Network Agent. If you do get this window, click
OK . When Windows
detects the new hardware, click Next .
Click the icon for the U.S. Robotics Wireless Configuration Utility. Click
Wireless PC Card or PCI Adapter .
Follow the on-screen instructions and wait for the files to be copied to
your hard drive. A window will appear showing you the files that have
loaded onto your system. Close this window. The program window with
the Configuration Utility icons will appear. Close this window.
Your software setup is complete. Click OK , and prepare to install your
hardware. Do not remove the U.S. Robotics Installation CD-ROM from
your CD-ROM drive. Shut down your computer.
The Configuration Utility is used to change or verify the configuration
information that relates to your Wireless Access PC Card or PCI Adapter.
The Configuration Utility icon will also be colored to indicate the status
of your wireless network: red for disconnected, yellow for connected
with poor quality, and green for connected with good quality.