8
8
Connect the Ethernet or USB Cable
Follow the instructions below for the connection type (Ethernet or USB) you
selected in Step 2.
Ethernet
•
Insert one end of the Ethernet
cable to the “ENET” port on the
back of the U.S. Robotics
SureCon-
nect
ADSL USB/Ethernet Modem.
Connect the other end of the Ether-
net cable to the Ethernet port on
your computer’s 10/100 network
interface card.
•
The modem will begin an initializa-
tion sequence. This may take a minute.
•
The installation of the U.S. Robotics
SureConnect
ADSL USB/Ethernet
Modem is complete. Click
Finish
, and remove the CD-ROM from the
CD-ROM drive of your computer.
If your ISP gave you software to install, do so at this time. Be sure to
read and follow all of the installation instructions provided. Once the
software is installed, you may need to establish a dial-up connection
in order to access the Internet. If your ISP gave you software to
install, a user name and password should have also been assigned.
9
9
The Registration screen displays once you have established a connection. You
can test your connection by registering your modem. Click
Yes
to register your
modem, and you will be brought to the U.S. Robotics Web site.
USB
•
If you have chosen to connect via the USB port, insert the rectangular
end of the included USB cable into the USB port of the computer, and
the square end of the cable into the port labeled “USB” on the U.S.
Robotics
SureConnect
ADSL USB/Ethernet Modem.
•
The Found New Hardware Wizard will display, and the new hardware
will begin to install. Follow the New Hardware Wizard’s on-screen
instructions to complete the installation of the hardware. If the New
Hardware Wizard does not display, refer to the “Troubleshooting” sec-
tion of this Quick Installation Guide.
U.S. Robotics has thoroughly tested this driver in conjunction with the support
hardware and has verified compatibility with Windows XP, 2000, & Me.
Windows XP, 2000, & Me
Windows XP
A software installation warning will display stating that the soft-
ware you are installing has not passed the Windows logo testing.
Click the
Continue Anyway
button.
Windows 2000 and Me
A Digital Signature Not Found screen may appear. Click
Yes
to con-
tinue with the installation.
Some Internet Service Providers require additional soft-
ware be installed for optimum performance. If your ISP
requires additional software, it will be installed when you
click
Finish
.
10
10
•
After the modem is detected, you will need to restart your computer.
Select
Yes, I would like to restart my computer now
then click
Finish
.
•
After restart, a window will display confirming that the modem driver
has been installed, click
Next
.
•
The installation of the U.S. Robotics
SureConnect
ADSL USB/Ethernet
Modem is complete. Click
Finish
and remove the CD-ROM from the
CD-ROM drive of your computer.
Windows XP, 2000
Windows XP
A Found New Hardware Wizard screen for both t
he Loa
der and the Adapter
will display. Select the
Install Software Automatically
option and click
Next
.
Windows 2000
A screen will confirm when each device has been installed. Click
Finish
to
continue to install the software required to operate the modem.
11
11
If your ISP gave you software to install, do so at this time. Be sure
to read and follow all of the installation instructions provided. Once
the software is installed, you may need to establish a dial-up
connection in order to access the Internet. If your ISP gave you
software to install, a user name and password should have also
been assigned.
Establish a Dial-up Connection
Double-click the dial-up networking icon that has just been created. It
will be located on your desktop. If the networking icon is not available
on your desktop, follow the instructions below for your operating
system in order to locate the networking icon.
Some Internet Service Providers require additional soft-
ware be installed for optimum performance. If your ISP
requires additional software, it will be installed when you
click
Finish
.