Other Operating Systems
6-5
If You Are Using UNIX, Linux, or AIX
To set your Courier V.Everything to answer incoming calls, set DIP
switch 3 OFF; set 4 and 8 ON.
Linux has a built-in communications software package called minicom.
You can obtain minicom on the U.S. Robotics FTP site (ftp.usr.com) in the
usr/bin directory.
For instructions about how to set up your UNIX®, Linux, or AIX
communications software package, visit the U.S. Robotics Totalservice
web site at http://totalservice.usr.com.
Configuring Your Internal Courier for Dial-In Only
If you are using your Courier V.Everything for dial-in only, set DIP switch
4 ON, and leave the other switches in their default positions. You may
need to set DIP switch 1 ON if your computer does not send a Data
Terminal Ready (DTR) signal.
Configuring Your Internal Courier for Dial-In and Dial-Out
If you are using your Courier V.Everything for dial-in and dial-out, set
DIP switches 3, 4, 7, and 8 ON, and leave the other switches in their
default positions. You may need to set DIP switch 1 ON if your computer
does not send a Data Terminal Ready (DTR) signal.
These are the standard port names and settings:
Outgoing Calls
Incoming Calls
Port
IRQ
I/O Address
/dev/cua0
/dev/ttyS0
COM1
4
03F8
/dev/cua1
/dev/ttyS1
COM2
3
02F8
/dev/cua2
/dev/ttyS2
COM3
4
03E8
/dev/cua3
/dev/ttyS3
COM4
3
02E8
Use the setserial command to tell Linux about any nonstandard
COM/IRQ combinations that you may have set using your Courier’s
jumpers. Setserial also selects serial port speed and I/O port address.
Summary of Contents for Courier V.Everything
