manualshive.com logo in svg

US Robotics 005689-03, Manual

Share
Download
US Robotics 005689-03 Manual Download Page 61

63

Radio and Television Interference

Radio and Television Interference

This equipment generates and uses radio frequency energy and if not installed and
used properly, in strict accordance with the manufacturer’s instructions, may cause
interference to radio and television reception.  The Sportster modem has been
tested and found to comply with the limits for a Class B computing device in
accordance with the specifications in Part 15 of FCC rules, which are designed to
provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular
installation.  If this device does cause interference to radio or television reception,
which you can determine by monitoring reception when the modem is installed and
when it is removed from the computer, try to correct the problem with one or more
of the following measures.

•

 

Reorient the receiving antenna (for televisions with antenna reception only) or
cable input device.

•

 

Relocate the computer with respect to the receiver.

•

 

Relocate the computer and/or the receiver so that they are on separate branch
circuits.

Summary of Contents for 005689-03





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands