18
If both modems exchange carrier
If both modems exchange carrier
signals but fail to establish a
signals but fail to establish a
communications link,
communications link,
•
Place the call again. The telephone
company routes all calls, even local calls,
differently each time you call.
•
Call a different modem to see if the
problem persists.
•
The remote modem might be an older 2400
bps modem that doesn't support error
control. Disable error control by entering the
following command in terminal mode:
AT&M0<Enter> and place the call again.
If your modem doesn't connect at
If your modem doesn't connect at
2400 bps with a 2400 bps modem,
2400 bps with a 2400 bps modem,
The remote modem might be an older 2400 bps
modem that does not support error control.
Disable error control with the following
command: AT&M0<Enter> and try connecting
again. When the call is finished, reset the
modem: ATZ<Enter>.
During data transfer…
During data transfer…
If your screen displays random or
If your screen displays random or
garbage characters,
garbage characters,
•
Set your software to the same word
length, parity, and stop bits as the remote
modem.
Summary of Contents for 005689-03
Page 20: ...21 Internet FTP ftp usr com ...
