15
www.uscutter.com
425.481.3555
OFFLINE/PAUSE SCREEN
Offline mode is used to reposition the cutting material and blade so that a new starting position can be set
for the next design. Offline mode can also be accessed while the cutter is in operation and will pause the
current cutting process. Although changes can be made to the material and blade positions if Offline/Pause mode is
accessed during cutting, making changes to either setting is not normally recommended.
RESET BUTTON
Resets by stopping the cutter, and setting the origin of the carriage arm to
its right most position.
OFFLINE/PAUSE BUTTON
Ignores any changes that have been made to the material or blade positions
and exits Offline/Pause mode, returning the cutter to the main screen.
Resumes any cutting that was taking place when Offline/Pause mode was
entered.
SETUP BUTTON
Has no function in this mode.
TEST BUTTON
Accepts any changes that have been made to the material or blade
positions and exits Offline/Pause mode returning the cutter to the main
screen. Resumes any cutting that was taking place when Offline/Pause
mode was entered from the new blade/material positions.
ORIGIN BUTTON
Accepts any changes that have been made to the material or blade
positions and exits Offline/Pause mode returning the cutter to the main
screen. Resumes any cutting that was taking place when Offline/Pause
mode was entered from the new blade/material positions.
V+ / V- BUTTONS
Repositions the material by moving the feed rollers. After movements
are made you can confirm the changes by pressing the TEST or ORIGIN
buttons or cancel by pressing the OFFLINE/PAUSE button.
F+ / F- BUTTONS
Repositions the blade by moving the carriage arm. After movements are
made you can confirm the changes by pressing the TEST or ORIGIN buttons
or cancel by pressing the OFFLINE/PAUSE button.
