UC1122 User Guide
19
4.5.2 Open a Command File
You can import the existing command file from your PC with following steps.
1. Click "Open a Command File".
2. Select the command file.
4.5.3 Save the Command to Device
You can click "Save the Command to Device" to save the command having been configured on
the Ursalink ToolBox.
4.5.4 Save the Command as File
You can click "Save the Command as File" to save the command having been configured on the
Ursalink ToolBox as a file and save it on your computer.
4.6 IF-THEN Behaviour Command
The Ursalink UC1122 is running with a number of defined behaviour commands. Each command
takes the form of an IF-THEN statement pair. You are thus able to select certain trigger conditions
to cause desired actions. The Ursalink UC1122 allows up to 8 separate behaviour commands with
some models.
Users can select time or input constraints for any IF-THEN statement pairs, so that an action will
only be triggered during certain period within a day, or only if certain input/output conditions are
met.
The user can enter the edit page by clicking
, or delete the command by clicking
.
4.6.1 Supported IF Condition
4.6.1.1 IF the Time Is ...
A command containing this IF condition will be triggered at a specific time every day within a
specified range of dates, or on every selected day of the week.
The user can choose the day of the week from:
Summary of Contents for UC1122
Page 1: ......