11
Application
Session Key
Enter the application session key of the device. The
AppKey is an application session key specific for the
end-device. It is used by both the application server and
the end-device to encrypt and decrypt the payload field
of application-specific data messages.
5572404c6
96e6b4c6f
526132303
13823
Reporting
Interval
The UC11-T1 reports the temperature and humidity at
regular intervals.
Range: 5-30 (mins)
20
Regular Report
Confirmed
After sending the regular report packet to the network
server, if the device does not receive ACK bit from the
network server, then the device will resend the packet.
Note: If the device doesn't receive ACK for a long time,
the device will resend regular report confirmed packets
3 times at most.
Disabled
Alarm Report
Confirmed
After sending the attribute package or alarm packet to
the network server, if the device does not receive ACK
bit from the Network Server, then the device will resend
the packet.
Note: If the device doesn't receive ACK for a long time,
the device will resend regular report confirmed packets
3 times at most. However, the device will resend
attribute package all the time.
Disabled
Temperature
Intelligent
Report
When the temperature changes beyond 2
℃
(35.6
℉
),
the device will automatically report the latest value.
Enabled
Temperature
Alarm
Enable: The device will send an alarm notification to
Network Server if the temperature
goes above/below
temperature thresholds.
Disabled
greater than
Enter the maximum temperature threshold.
Null
less than
Enter the minimum temperature threshold.
Null