13
E N G L I S H •
User’s manual
- If motor doesn’t start: The fuse: Replace
time delay fuse or reset circuit breaker.
Brushes worn: Have carbon brushes replaced
by an authorized service center.
- If you feel a loss drive: Worn or broken drive
belt: Replace belt.
- If the sanding efficiency reduces: Abrasive belt
worn, clogged or cracked: Replace abrasive belt.
Danger of injury!
Before all care and maintenance work:
• Turn the machine off.
• Wait until the machine has come to a com
-
plete standstill.
• Pull out the power plug.
Cleaning
Clean the machine regularly after each use
from dust, shaving, wood splinters, etc.
Clean the machine with a moist cloth and some
soft soap. Do not use any detergents or solu-
tion; these may cause corrosion of the plastic
parts of the machine. Make sure that no water
reaches the inside of the machine.
Replacement parts
Danger of accident!
Parts which were not reviewed and approved
by the manufacturer can damage the machine
and can cause serious injuries.
Use only original parts for replacing old parts,
particularly for safety mechanisms and cutting
tools.
VOLTAGE-FREQUENCY
NO LOAD SPEED
SAND BELT CAPACITY
POWER
WEIGHT
120 V ~ 60 Hz
(600-1100) r/min
3’’ x 21’’ (76mm x 533mm)
720 W
3,8 kg
TECHNICAL DATA
LB821 manual.indd 13
29/06/15 12:41
