6
E N G L I S H
MAINTENANCE
• Both the maintenance and repair of this
jack may only be carried out by qualified
and authorized personnel.
• Clean and lubricate the moving parts of
the jack at regular intervals. The whole
jack should be kept clean and protected
from aggressive conditions at all times.
• If the oil level needs to be checked or
refilled, proceed as follows: With the jack
in the vertical position and the piston
fully retracted, remove the filler plug
and drain its contents into a container.
Position the jack in a horizontal position;
proceed to introduce the necessary
volume as indicated in the table. Then
reinsert the filler plug. IMPORTANT: An
excess of oil over the volume required
may affect the operation of the jack.
• Only use hydraulic oil, HL or HM type.
IMPORTANT: Never use brake fluid.
• Following a period of prolonged
intensive use, it is recommendable to
change the oil in order to extend the
useful life of the jack.
• When the jack is not in use, the piston
should be fully retracted to avoid
corrosion. It is recommendable to apply
an anti-corrosion product to the main
piston and to the pump. Store the device
in a dry and clean place.
#
Description
Quantity
1
Power unit
1
2
O Ring Ø7.7x1.9
1
3
Air vent valve
1
4
Nut
4
5
Spring washer Ø12
4
6
Washer Ø12
12
7
Castor wheel
4
8
Wheel stand
2
9
Washer Ø16
4
10
Spring washer Ø16
4
11
Inside hex bolt M16x75
4
12
Nut M12
4
13
Saddle unit
1
14
Cramp
2
15
Iron
4
16
Outside hex bolt M12x25
6
17
Butterfly nut M12
4
18
Round head bolt M12
2
19
Hook M8
2
20
Butterfly nut M8
2
21
Chain
2
22
Nut M8
6
23
Outside hex bolt M8x25
6
24
Washer Ø8
6
25
Handle
2
PART LIST
