11
EN
Cleaning the device
Rub gently with a dry cloth to remove dust and dirt.
Dip the cloth in a neutral detergent if dirt cannot be removed with a dry cloth alone.
Do not use spray products to clean the device. Do not clean the device using volatile liquids (such a
petrol, alcohol, solvents, etc.) or chemically treated cloths to prevent deformation, deterioration or
scratches to the paint finish.
Disconnect the device from the electrical outlet before any cleaning or maintenance operations.
Hard Disk
The hard disk installed in this device is sensitive to shock, temperature changes and vibrations. Failure
to adopt suitable precautions could compromise the proper functioning of the device and cause loss of
data from the hard disk.
If repairs are required, it is advisable to backup all important data before taking the device to the
service centre. Urmet S.p.A. is not liable for the loss of stored data.
Hard disks must be installed by qualified technical personnel or by contacting the technical support
centre.
Image recording
This device was designed to record images. It is not a burglar alarm. URMET SpA cannot be held liable
for loss or damage due to theft suffered by the user.
Make a test recording before using the device to ensure that it is working properly. URMET SpA is not
liable for loss of stored data due to loss or damage caused by failure to follow the instructions for
installation and use, improper use or malfunctioning of the device. This device contains precision
electronic components. Protect the device from shocks to ensure proper image recording.
Privacy and Copyright
The NVR is a device for CCTV systems. The recording of images is subject to the laws in force in the
country of use. Recording of images protected by copyright is forbidden.
Product users are responsible for checking and complying with all local rules and regulations regarding
monitoring and the recording of video signals. The manufacturer SHALL NOT BE LIABLE for any use of
this product not in compliance with the laws currently in force.
Software upgrade
Regularly check the specific section of the manufacturer's website at www.urmet.com in the page
dedicated to the product under the section DOCUMENTATION AND RESOURCES.
Firmware upgrade
Contact URMET SpA Customer Service to check the availability of firmware upgrades.
Network configuration
By default, the NVR is set with a static IP address 192.168.1.3.
Using the NVR OSD menu, assign the NVR an IP address that has not already been assigned to other
devices, in order to avoid network conflicts.
After assigning an appropriate address to the NVR, it can be connected to the network.
By opening the web page of the device from Internet Explorer you will be asked to change the password
which by default is “admin” (login user “admin”). It is recommended that you always customize your
password.
To detect the device on the network and perform the basic configurations, use the SearchConfig Tool
V2.0 software available for download on the website www.urmet.com in the page dedicated to the
product under the DOCUMENTATION AND RESOURCES section
2
Installing the HDD
Schematic diagrams for installing the standard NVR HDD:
1.
Remove the screws on the rear and sides of the chassis and then remove the top cover.
Summary of Contents for NVR 1098/405P
Page 2: ...DS1098 036 2 GUIDA RAPIDA QUICK GUIDE GUIDE RAPIDE SCHNELLANLEITUNG...
Page 30: ......
Page 31: ......
