urmet domus NVR 1098/405P, Quick Manual

Page: 10 / 32

DS1098-036 10
EN
1
General Information
Dear Customer,
Thank you for purchasing this product.
This document describes how to quickly install and use the URMET S.p.A. S+265/H.265/H.264 series
NVR models. Before using the device, read this document carefully and keep in a safe place where it
is easily accessible for reference when needed.
*NOTE
For further information, see the instruction manual on the Urmet website. To download the manual
from the site, see the QR code on the Addendum sheet.
WARNINGS
Power supply
Before connecting the device to the electrical outlet, ensure that the ratings on the nameplate match
those of the mains power supply.
Do not pull on the cable to unplug the device.
Switch off the device before disconnecting the power. Do not switch the NVR off while recording or
playing, or from the configuration menu. Stop recording and playback before disconnecting the device,
to prevent damage to the hard disk.
Safety precautions
Keep the device away from rain and dampness to prevent the risk of fire or electrocution. Do not
introduce any material (solid or liquid) inside it. If this should accidentally occur, disconnect the device
from the mains outlet and have it inspected by qualified personnel.
In all cases, contact qualified personnel or an authorised service centre for repairs (www.urmet.com
>> Contacts >> Technical Support Centres).
Keep the device away from children, to avoid accidental damage.
Do not touch the device with wet hands to prevent electric shock or mechanical
damage.
Stop using the device if it falls or if the external casing is damaged. Continuing to use the device in
these conditions could cause electric shock. Contact the retailer or authorised installer.
Installation precautions
To prevent the device from overheating, place it in a position that allows a flow of air through the
vents in the casing. Leave a space of at least 5 cm when installing in a rack. For the same reason, do
not install near heat sources such as radiators or hot air ducts.
Keep the device away from direct sunlight. Do not install in areas subject to excessive dust, mechanical
vibration or shock.
Do not place the device on an unstable surface, such as an unsteady or sloping table, as the device
could fall, causing damage or mechanical failure.
Do not install the device where it may be exposed to moisture or water. Do not spray water on the
device, to avoid risk of fire, electric shock or mechanical damage.
Stop using the device if water or any other material penetrates inside it, to prevent risk of fire or
electric shock. In such cases, contact the retailer or authorised installer.
Do not place heavy or heat-generating objects on top of the device: this could damage the casing
and/or increase the internal temperature, leading to damage.
Do not cover the device with a cloth while it is running to prevent deforming the external casing and
overheating the internal parts, causing risk of fire, electrocution and mechanical failure. Keep magnets
and magnetised objects away from the device to avoid malfunction. Do not use the device in the
presence of smoke, vapour, humidity, dust or intense vibrations.
Do not operate the device immediately after moving it from a cold place to a warm place or vice versa.
Wait for around three hours: this will allow the device to adapt to the new ambient (temperature,
humidity, etc.).