34
DS1723-001A
7.4
OUTDOOR CAMERA/RELAY 2 (OP20) CONNECTOR DESCRIPTION
The outdoor camera ref. 1092/250A can be connected to the Master video door phone using the wire (B7)
provided.
Wire n.
Wire colour
Description
Pin name on connector
1
Blue
Staircase lights (relay output 2 – OP20)
RELAY SPARE
2
Blue
Staircase lights (relay output 2 – OP20)
RELAY SPARE
3
Red
Camera power positive
CCTV POWER+
4
Brown
Video balun negative output signal
CCTV VIDEO-
5
Yellow
Video balun positive output signal
CCTV VIDEO+
6
Black
Camera power negative
CCTV POWER-
7.5
RELAY FUNCTIONS AND CONFIGURATIONS
The video door phone is provided with two programmable relays, as shown in the following table:
Relays
Possible function
Default
Riference
1
Supplementary ringer
✔
OP5
Home Automation button 1
Siren alarm
2
Home Automation button 2
✔
OP20
Siren alarm
Thermostat output
7.6
JUMPER CONFIGURATION (JP1 and JP2)
There are two jumpers on the video door phone:
JP1: this is used to insert the line termination. The line termination must be activated on the video door phone
connected to the end of a line which is not resumed with another segment from the LINE OUT terminals.
JP1
Terminal insert (default)
Terminal not inserted
JP2: this is used to power the video door phone from the Bus line or via a local transformer ref. 1723/22.
JP2
Bus light power supply (default)
Power from local transformer
7.7 DIP-SWITCH
CONFIGURATION
The video door phone has 8 dip-switches on the back of the device.
Dip-switches 5, 7 and 8 are not used.
•
•
