8
DS1717-021B
The QR code can be used to access the configuration guide for help.
The buttons configuration procedure is entirely similar to that of the buttons on a Yokis 8-buttons remote
control.
The Video door phone, however, automatically sends the necessary configuration pulses, without the installer
having to remember the number of pulses needed in the various cases (they are, however, specified in the text
for convenience)
E.g. if you choose to 'Connect' a button to a receiver, the Video door phone itself will send the required 5 short
configuration pulses.
The blue LED on the Video door phone matches the red LED on a Yokis remote control: it can be checked for
notification flashes. The display shows each time how many notification flashes are to be expected, to make it
easier for the installer to check.
WARNING Certain configurations may take a few seconds. Always wait for the required notification flashes
before moving on to other operations.
In all the screens a 'TEST' button is always available on the right side. At the end of a configuration procedure,
the operator can press it to test the behaviour of the button concerned.
It is always possible to go back to a higher level menu by pressing the 'OK' button.
Similarly, with a Yokis Remote control, a reset to initial settings for a specific button (and for that button only)
can always be controlled. To do this, go back to the next level up, select 'RESET', wait for the notification
flashes and begin configuration from the start. A single button resetting will not change the button icon and
name.
Summary of Contents for IperVoice 1717/31
Page 23: ...DS1717 021B 23...
