DS1717-021B
11
For more information, refer to the Yokis Radio Quick Installation Guide, in section 'F - Centralised control on
Radio Bus'.
NOTE: If you wish to simultaneously centralise both the Lights and the Shutters, you must:
-
configure a Centralised Button for the Lights, with the desired function,
-
configure a Centralised Button for the Shutters, with the desired function,
-
configure a Composite Button to combine both.
This solution can be used to 'mix' different tasks, such as: rolling down the Shutters and simultaneously
switching on the Lights. Or, closing the Shutters and turning off the Lights.
SET FUNCTION
Finally, it is possible to select an operation mode for the button by choosing one of the following 4 options:
-
Toggle (lights), Dim/Off (dimmer), Up/Stop/Down (shutter)
M 1
-
On (lights), Up&Stop (shutter)
M 3
-
Off (lights), Down&Stop (shutter)
M 4
-
Memory , Go to position (shutter)
M 2
Reference should be made to section ‘G – Pushbutton functions’ of the Yokis Radio Quick Installation Guide.
CONFIGURE RECEIVER
This option can only be used if a Button had been 'connected' to a single receiver module. In this case, it is
then possible to configure the receiver with specific sequences of pulses.
Using the keypad, the number of pulses to be sent to the Receiver Module with that specific button can be
defined. E.g. to configure the timing of the receiver. Then press 'Enter' and wait for a notification from the
receiver, typically displayed on the receiver (blinking or small movements).
Please refer to the individual Receiver Modules manuals for possible controls.
Summary of Contents for IperVoice 1717/31
Page 23: ...DS1717 021B 23...
