6
DS1060-117A
ENGLISH
1 DESCRIPTION
The device Ref. 1060/13 is an Elekta call module for Ipercom serverless system.
The main features are:
Signal management using 3.5” graphic colour display and evolved graphic user interface (GUI).
Simultaneous lock with pulse capacitance discharge (SE+; SE-) and no-voltage contact relay (C-NC-
NO) operation.
Garage gate lock low current operation (SE2).
Hall button input.
Door sensor input.
Audio repeat device control for use with hearing aid.
LAN connection with RJ45 connector and POE power.
Set-up by means of 2 terminals for local power supply.
125 kHz integrated transponder key reader (Ref. 1125/50).
Infrared proximity sensor for user detection.
CCD colour camera with wide-angle lens.
Alphanumeric keypad with 18 buttons, three of which multifunctional.
Black glass design.
2 INSTALLATION
Arrange wire conduits in order that they end in the lower holes of the
fl
ush mounting box.
Fix the
fl
ush mounting box Ref. 1145/53 at the height shown.
Fix the magnet (tamper) at the indicated height with the two-sided adhesive tape included
Make electric connections.
Fix the call module to the
fl
ush mounting box.
Fix the front panel to the call module.
80 mm
1,55 ÷ 1,60 m
TAMPER
The highlighted part of the magnet must face the wall of the box (in contact with the two-sided
adhesive tape).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
