urmet domus IPerCom-2Voice, Hardware Installation Manual

Page: 8 / 48

Specific network requirements for IPerCom are as follows –
Specific installation requirements for the 2Voice riser –
IGMPv2 or IGMPv3 Multicast Service must be enabled.
The following ports must be open and not restricted –
TCP ports 2049, 51234, 5060, 50118, 3306, 13451 to 3460, 111, 80, 433, 41365, 22,
918 & 40279.
UDP ports 32768, 2049, 514, 32771, 34956, 917, 34839, 67, 5060, 69, 975, 111, 123.
Multicast must be enabled on 238.0.0.200:55000 and on 239.255.0.200 (all ports).
TCP/UDP ports used for Internet access (if any) TCP:5060,6060 UDP:5060,6060.
Bandwidth per end point (Kbps) 2500 for upload and 10000 for download.
C
U R MET
E
B
J
U R MET
A
U R MET
F
U R MET
U R MET
U R MET
D
I
U R MET
G
U R MET
H
When adding all of the branches together in
the riser (A + B + C….+ J) the maximum total
amount of cable must not exceed 800M.
Additional 1083/59 Gateways can be installed
to achieve installations where more than
800M of cable is required.
As a general guide, after every 50 monitors
another 1083/59 (and 1083/20) should be
used – See example on Page 5
IP network
4