![urmet domus IPerCom 1741 Configuration Booklet Download Page 58](http://html1.mh-extra.com/html/urmet-domus/ipercom-1741/ipercom-1741_configuration-booklet_1062593058.webp)
58
DS1741-004
•
Select the
Network Settings
, then click on Device Status. He comes a window is displayed where the
network parameters relating to the video door entry phone are listed.
WARNING!
The parameters can only be read and not edited.
4.2.7 How to enable or disable the Panic icon
To enable or disable the Panic icon, follow the procedure below:
•
Switch on the screen by tapping it any point or by pressing the Home button.
•
Press the
icon to access the Top Page and then the
icon for the video door phone
application.
•
Press the
icon in the upper right corner to access the video door phone configurations page:
•
Tap the writing
Panic Alarm
(the current setting is shown on the right). A pop-up window opens where
you can choose whether to enable or disable the Panic Alarm.
•
Select the required setting or tap the
X
icon at the top right to close the window without making any
changes.
WARNING!
The Panic alarm function requires that:
— the video door phone system has a switchboard;
— the system has been properly set up (for more information, check the Ipercom manual on www.
urmet.com);
— there is a switchboard operator on duty;
— the switchboard operator has been properly trained on what to do in the event that a panic alarm
is received.