50-001-666 DOC.CLAVIER SAIL.KPAD HF FDI FR/GB/NL/DE.B
Normal / long sequence:
Note, when a valid sequence is entered, the old access code is replaced by the new one.
Short sequence:
In this case, the code is automatically setup for the relay 1 and monostable mode.
Delete an access code
Only this slot is deleted. If the same access code exists in several slots (different relays), all slots have to be removed.
Delete all access code
All access code are deleted. The master code and the relay release time are not modified.
Relay release time
Set in the receiver.
Back light
To increase the life time of the batteries, it is possible to unactivate the back light. The following programming sequence
could be entered to turn on/off the back light.
Buzzer
On/off
It is possible to turn off the buzzer, so the life time of the batteries is increased. The following programming sequence has
to be entered to turn on/off the buzzer.
36 00 #
00 not active
01 active
Validation
Slot
102 0 5 52*95 #
Slot
24h/7
Validation
Nb of digits
User code
101 0 5 12345 4 1 #
Slot
24h/7
Validation
Nb of digits
User code
Relay
Mono or bistable mode
** 101 #
Slot
Validation
** to delete
35 00 #
00
Validation
Slot