6
DS1375-024A
ENGLISH
WARNING!
For a functioning of the device it is strictly necessary that the iPerTAlk system version is
2.1.0
or higher.
1 DESCRIPTION
The device Ref. 1375/824 is an Elekta Steel vandal-proof call module for iPerTAlk system.
The main features are:
•
Signal management using 3.5” graphic colour display and evolved graphic user interface (GUI).
•
Simultaneous lock with pulse capacitance discharge (SE+; SE-) and no-voltage contact relay (C-NC-
NO) operation.
•
Garage gate lock low current operation (SE2).
•
Hall button input.
•
Audio repeat device control for use with hearing aid.
•
LAN connection with RJ45 connector and Power Over Ethernet (POE).
•
Set-up by means of 2 terminals for local power supply.
•
125 kHz integrated transponder key reader (future implementation).
•
CCD colour camera with wide-angle lens.
•
Alphanumeric keypad with 18 buttons, three of which multifunctional.
2 INSTALLATION
•
Arrange the duct so that it ends in correspondence with the lower hole of the
box.
•
Remove the lower cap from the wire hole (1).
•
Apply adhesive labels on the holes for the screws of the frame (2).
•
Install
box at indicated height (3).
•
Fix the magnet (tamper) at the indicated height with the two-sided adhesive tape included (4).
•
Fix the frame to the
body (5).
•
Make the electric connections.
•
Fix the calling module to the frame (5).
ALTO
TOP
HAUT
A
ALTO
TOP
HAUT
B
ALTO
TOP
HAUT
118 mm
1,55 ÷ 1,60 m
298 mm
1
2
3
Summary of Contents for ELEKTA STEEL 1375
Page 11: ...11 DS1375 024A ...
