2
−−−−
sec.4b
2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
COMfORT SIgNO DOOR PHONE
Ref.83/2
Signo door phone recalls the style of Signo video door phone.
Designed by architect Citterio, Signo door phone has a perfectly flat
surface harmonized with the absence of corners.
On the front panel there are the button for door opening, backlit by
leds, and 3 buttons for additional services as intercom calls, opening
of the second electric lock, etc.
Signo door phone has an electronic management of the call ring
tone with a loudspeaker dedicated to this function, placed under the
handset. Also the switch used to adjust the call volume with “Mute”
function is hid by the handset.
When the switch is in “Mute” position, a little red flag comes out of the
door phone body to indicate the absence of the call ring tone.
Call voume
Call voume
Excluded call
BUTTONS fUNCTION
State
Button
Idle and on
hook
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Driveway door
lock release
Driveway door
lock release
Driveway door
lock release
- -
- -
Off-hook
waiting time
(call received)
- -
- -
Speaking
- -
- -
Idle and
off hook
Intercom call
(default: not
programmed)
Intercom call
(default: not
programmed)
Intercom call
(default: not
programmed)
TERMINAl PINS DESCRIPTION
Line
}
Bus Line
Line
CP
}
Floor call
CP
S+
}
Additional ringer
S-
TECHNICAl CHARACTERISTICS
Power supply voltage:
36 ÷ 48Vdc
Current consumption in standby:
3,0mA max
Max. current consumption:
70mA max
Operating temperature range:
-5°C ÷ +45°C
Reference standards:
EN 6000-6-3
EN 6000-6-
Max. humidity:
90% UR
Default values:
All door phones have the following factory default setting:
USER = 127
INTERNAL = 0
Line termination = ON
Line termination
For programming procedure, see the section “System installation
and activation”.
INSTAllATION
To install Signo door phone perform the following operations:
1. Remove the door phone cover.
2. Fix the base to the wall with the provided screws and screw
anchors.
3. Configure the programming dip-switches and connect the door
phone to the system.
4. Mount again the cover.
§
COMfORT SIgNO DOOR PHONE
TECHNICAl CHARACTERISTICS - INSTAllATION
COM
fORT SI
g
NO DOOR PHONE
Ref.
83/2
