sec.4b
−−−−
3
2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
OPTIONAl PROgRAMMINg
In 2VOICE system each user can select the door phone call ring tone
and the floor call ring tone among the 5 available ones.
DOOR PHONE CAll RINg TONE
1. By keeping the door lock release button pressed, press and
release the button
.
2. The apartment station emits a call ring tone.
3. By keeping the door lock release button pressed, press again the
button
to change the call ring tone.
4. When the call ring tone has been selected, release the door lock
release button.
5. The call ring tone is programmed.
The selected call ring tone is the same for all door phone calls.
However, the call ring tone source can be identified thanks to the call
ring tone timing:
Call source
Time
Ring total duration
Main call station
3 s ON
3 s
Secondary call
station
0,4 s ON 0,2 s OFF
for 5 times
2,8 s
Intercom
0,5 s ON 0,5 s OFF
for 3 times
2,5 s
Switchboard
0,1 s ON 0,05 s OFF
for 3 times pause
0,2 s repeated for 5
times
2,8 s
flOOR CAll RINg TONE
1. By keeping the door lock release button pressed, press and
release the button
.
2. The apartment station emits a call ring tone.
3. By keeping the door lock release button pressed, press again the
button
to change the call ring tone.
4. When the call ring tone has been selected, release the door lock
release button.
5. The call ring tone is programmed..
PROgRAMMINg DATA DElETINg
To delete all optional programming data (intercom call codes), perform
the following operations:
By keeping the door lock release button pressed, pick the handset
up.
Press at the same time the buttons and
and keep them pressed
for 3 seconds until a tone confirming the deletion is emitted.
Release the buttons and
and hang the handset up.
The deleting procedure does not change the previously selected
call ring tones.
•
•
•
§
COMfORT SIgNO DOOR PHONE
OPTIONAl PROgRAMMINg - PROgRAMMINg DATA DElETINg
COM
fORT SI
g
NO DOOR PHONE
Ref.
83/2
