DS1093-029
46
2.4.1.3 Mask
Use this option to set the subnet mask of the device.
Press “
EDIT
” and use number keys 0
9 to enter the mask number. Use “
◄►
” to shift the cursor. Press “
ENTER
” to confirm or
“
ESC
” to cancel.
2.4.1.4 Gateway
This option can be used to set the gateway of the device.
Press “
EDIT
” and use number keys 0
9 to enter the address. Use “
◄►
” to shift the cursor. Press “
ENTER
” to confirm or “
ESC
”
to cancel.
2.4.1.5 Http
port
This option can be used to set the port number used for the Internet Explorer browser. The default setting is 80.
Press “
EDIT
” and use number keys 0-9 to enter the port number. Use “
◄►
” to shift the cursor. Press “
ENTER
” to confirm or
“
ESC
” to cancel.
2.4.1.6 Email
It is now possible to send Email (with snapshots attached) when events (i.e. Motion Detection, Sensor, Tampering, Video Loss)
are triggered.
2.4.1.7 Advanced
settings
Select “
ADVANCED SETTINGS
” and press “
ENTER
” to access advanced settings.
2.4.1.7.1 NTP
This function permits the time synchronization of the DVR through Internet. The user has to indicate the NTP Host chosen for
the synchronization (based on his own time zone).
Proper configuration of Web Port, Data Port, IP address, Gateway and IP DNS of the DVR must be guaranteed for the correct
use of the NTP function.
2.4.1.7.2
IP server
For future application.
2.4.1.8 PPPoe
This option is used to enable PPPoE dial- up functions.
To enable, select the respective check box using “
◄►
” and press “
ENTER
” or “
EDIT
”.
Symbol “
” indicates that the PPPoE function is enabled; symbol “
×
” indicates that it is not.
The following can be defined after enabling the “
PPoE
” option:
user
password
verify
User
This option is used to enter the user name for PPPoE authentication.
The user name may consist of up to 32 characters.
Password
This option is used to enter the password for PPPoE authentication.
The password may consist of up to 14 characters.
Verify
This option is used to enter the password again for PPPoE authentication.
2.4.1.9 DDNS
The use of this function is not suggested. It is better to use the same function available on the ADSL Router.