DS1092-525
25
Put the button in the different positions to move on the desired character. Press the central button to
confirm it. Use the arrows
/
to move and separate the selected characters. Select CLR to delete
the selected characters. Select POS and press the button to automatically quit the submenu and display
the previously selected characters. Put the button on the telecamera in the different positions to move the
characters in the desired position. Once the position has been defined, press again the button to go back to
the previous menu. To quit the menu select END.
MOTION – MOTION DETECTOR
This function allows to detect movements in the camera captured images. In this special screen, the scene
is split up into sectors, that can be activated by the user. Therefore it is possible to make some specific
points sensitive to movement (up to 4) and exclude other ones. For example, if the scene includes a door
and a window, the alarm can be activated only by a door movement, excluding any movement of the
window. In case of sudden movements (i.e. when the door opens) the operator will see a signal on the
screen. This will have the specification that was set up in correspondence to the sensitised area where the
movement happened.
Select ON to access to the following submenu:
MOTION
SELECT
AREA1
DISPLAY
ON
SENSITIVITY
■■■■■█■■■
64
COLOR
GREEN
TRANS
1. 00
ALARM
DEFAULT
RETURN
RET
Option
Value
Description
SELECT
AREA1
÷
AREA4
The scene is split up into areas that can be activated by
the user. Select each area to be set and confirm with the
option DISPLAY (see below)
DISPLAY
ON
÷
OFF
Select this option to enable (ON) or disable (OFF) motion
detection for previously selected areas.
SENSITIVITY
0
÷
100
This function allows to increase or decrease the motion
detector sensitivity.
Use the camera joystick to select a value from 0 (low
sensitivity) and 100 (high sensitivity).
COLOR
GREEN
÷
BLUE
÷
WHITE
÷
RED
This function allows to define the perimeter color of the
selected area
TRANS
0.00
÷
1
Not available
ALARM
/
Alarm motion signals management (see below)
DEFAULT
/
It allows to restore the default settings.
