DS 1092-182
23
The options available for LEVEL are: middle, high, low. The function AREA allows to define dimension and
position.
HSBLC
is accessed by selecting the following submenu:
HSBLC
SELECT
AREA1
DISPLAY
ON
BLACK MASK
ON
LEVEL
■■█■■■■■■■■
20
MODE
ALL DAY
DEFAULT
RETURN
RET
The SELECT menu provides 4 areas. For those areas set their position and size (DISPLAY), their
brightness level (0 to 255) and their MODE (ALL DAY and NIGHT, which you can adjust the AGC LEVEL
for) to enable the BLACK MASK . You can use the DEFAULT command to reset the previous values.
Selecting LEVEL allows to choose the desired percentage.
When adjusting the Level, make sure the set up adjusting value is acceptable for both day and night.
Use a low percentage if there is faint light around the light source (to obtain the max. compensation); use a
high percentage if there is bright light around the light source (to obtain the min. compensation).
WHITE BAL – WHITE BALANCING
Note:
this menu is not active if the camera is in B/W mode (see DAY & NIGHT MENU).
This function is used to select white balancing mode. Select this menu item to choose among the options in
the table.
Option
Value
Description
AWB
/
Auto White Balance: allows an automatic white balancing
when color temperature range (color gamma) is
particularly wide.
ATW
/
Auto Tracking White Balance modes allow an automatic
adjustment based on surrounding environment detection
AWC
SET
/
White balancing setting, to be used when a single
adjusting is preferred to automatic adjusting (constant
lighting condition).
Press the menu button to activate this
function.
MANUAL
BLUE ÷ RED
Manual adjustment of the colors red and blue. Choose
among the values from 0 to 100.
INDOOR-OUTDOOR
/
Automatic adjustment based on surrounding environment
detection: installations INDOOR or OUTDOOR.
Important note:
you should preferably use the ATW option.
