24
DS1092-133
Power cable
Video out cable
Alimentation
Video input
VERTICAL ADJUSTMENT
Loosen the ring on the bracket and the adjusting screws shown in the figure.
put the bracket in vertical position
point the camera at the vertical position
point the camera at the desired position
Once the adjustment has been performed, tighten the screws and the ring by locking it with the grub
screw and the suitable spanner (provided).
Important note:
Do not rotate excessively the camera, in order not to damage the cable inside the bracket.
5.
Connect the video output to the selected terminal device.
6.
Power the telecamera.
Unscrew the screw on the bottom of the camera to access to the adjustment screws and to the OSD
menu button.
ADJUSTING SCREW
UNSCREW FOR ACCESS TO
REGULATIONS
Summary of Contents for 1092/218
Page 99: ...DS 1092 133 99...
