6
DS1092-037
ACCESSORIES PROVIDED
•
N°1 guide pattern (drilling template).
•
N°1 allen wrench.
•
N°1 mount fixing screw.
•
N°1 red/black power supply cable connectorized with female jack Ø 2.1 mm.
INSTALLATION SPECIFICATIONS
•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
off. The subject must not be backlight.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
device to the mains.
INSTALLATION
1.
Before starting to wire, make sure that all the units to be connected are OFF.
2.
Use the guide pattern to drill fixing holes in the chosen surface and cables passage.
3.
Unscrew the fixing base from the ring lock to separate the camera, as in figure.
4.
Fix the base to the surface with 3 screws. If it is not planned an hidden installation of connection
cables, use the slot present on the base to draw out the connection cables present on the camera
body, without pinching them, in order to avoid malfunction.
5.
Bring the cover near the fixing base and screw the ring lock to the fixing base without tightening
6.
Adjust the camera slant as regards the desired image capture point
7.
Screw tightly the ring lock to the camera base. Use the provided locking screw, in order to avoid
loosening between the two parts, by screwing it with the spanner provided in the hole present in the
ring lock.
Mount fixing screw
Fixing base
Mount fixing screw
Body camera
Protective
dome
Ring lock
Summary of Contents for 1092/132
Page 11: ...DS1092 037 11...
