Adjustment: Turn off the power. Clockwise rotate the bolts of the left and right rear rollers by
1/4 turn simultaneously with the 5mm Allen wrench to tighten the running belt. Then power on
the machine and test the tightness of the running belt. Adjust the running belt with this method
until its tightness is appropriate.
Note: When you are running on the walking machine, the pressure on the running belt is imbalanced
as the force applied by your feet on the belt is different, which will deviate the running belt from
the center. Such deviation is normal and the running belt will return to the center if no one runs
on it.
The running belt cannot be tightened too much. Failure to do so may damage the running belt,
the roller bearings, etc., increase the pressure on the front/rear rollers, and cause abnormal
noise or other problems.
ADJUSTMENT OF RUNNING BELT
14
BATTERY REPLACEMENT
ADJUSTMENT OF RUNNING BELT
Summary of Contents for STROL LITE UR9TM0011
Page 19: ......
