ureach MTS-SAS Series, User Manual

Page: 17 / 67

17
- 6.4 Skip Bad Sectors
- 6.5 Minimum Speed
- 6.6 Check Source Minimum Speed
- 6.9.1 Unknown Format
- 6.9.8 Copy HPA Area
Using appropriate copy modes can greatly reduce operation time and increase efficiency.
There are four copy modes with different copy methods.
❶System and Files
Copies data and skips empty space. Only supports standardized formats.
Scroll to select "System and Files”, then press "OK" to save the copy method.
Allows user to copy source device’s System and Files, instead of the entire device. The
system will analyze the source device and identify the data area to copy. If the source
device’s data is within the target device’s capacity, the copy will be processed.
FAT16/32/exFAT, NTFS, EXT2/EXT3/EXT4/lvm, and HFS/HFS+/HFSX are supported in this
copy mode.
❷All Partitions
Copies all partitions and data, unallocated partitions not included.
Scroll to select "All Partitions”, then press "OK" to save the copy method.
The target device’s capacity must be equal to or larger than the source device’s capacity.