URC Total Control TDC-9100 Page 2 Owner'S Manual Download

Page: 2 / 41

Total Control

TDC-9100

Owner’s Manual

Rev 1.0

Introducing the TDC-9100

Thank you for purchasing URC’s TDC-9100 In-Wall Network Keypad. Its easy and
intuitive use helps to simplify your life while adding control of more things than you
thought possible.

Online Support

Total Control is sold direct only and must installed/program by a certified
custom integrator.

End-User Support

Visit the

URC Home Page

for product information, owner’s manuals, and support

contact information.

Contact Support

Total Control is a URC product sold direct only. For questions or assistance contact
your Custom Installer/Programmer.

My Installer/Programmer

Technical Suppor t

Toll Free: 800-904-0800

Main: 914-835-4484

[email protected]

H o u r s : 9 : 0 0 a m - 5 : 0 0 p m E S T M - F

Features and Benefits ......................... 1

Updated User Experience ........... 1

Audio-Video Interface ................. 1

Gigabit Ethernet ............................ 2

PoE+ ................................................ 2

5GHz Wi-Fi ..................................... 2

Main Menu Navigation ...................... 4

Main Menu: View Modes ........... 5

Title Bar ................................................. 6

Room’s Menu ................................. 7

Room Linking................................. 8

Now Playing .................................. 9

Core Buttons ....................................... 10

Shortcut Popup Menu ....................... 11

Adding Shortcuts ........................ 11

Removing Shortcuts ................... 12

Status Bar .................................... 13

Intercom .............................................. 15

Navigating the Intercom Menu 17

Making Calls: Audio-Video ...... 18

Making Calls: Audio Calls ........ 20

Making Calls: Audio Broadcast22

Do Not Disturb Mode ................. 24

Scenes Menu ..................................... 25

Charging the TDC-9100 ..................... 26

Fast Charging .............................. 26

Wi-Fi Setup ......................................... 27

Settings Menu .................................... 28

Sleep Settings ............................. 29

General ......................................... 30

Sound ............................................ 31

Brightness.................................... 31

Proximity Sensor ........................ 32

System Information .................... 33

Network ....................................... 34

Intercom ....................................... 35

Power ........................................... 36

Factory Default............................ 37

Specifications .................................... 38

Limited Warranty Statement............ 38

Table of Contents

Summary of Contents for Total Control TDC-9100










































Search results

Summary of Contents for Total Control TDC-9100

Reviews:

Related manuals for Total Control TDC-9100

Brands by name

Popular brands

URC Total Control TDC-9100, Owner'S Manual

Search results

Summary of Contents for Total Control TDC-9100

Reviews:

Related manuals for Total Control TDC-9100

Brands by name

Popular brands