73
RFTX-1
This device connects to the rear of the MRX-10 and provides direct
control of URC Lighting products from the MRX-10. This is not necessary
if there is an RFTX-1 connected to a MRX-1, and it is within range of the
local room.
VID-6
This video sensor cable is designed to connect to a sensor port on the
MRX-10 (
or MRX-1
). Using URC Accelerator programming software, a
Macro can be programmed to react to the status of this sensor.
VS-1006
This voltage sensor cable is designed to connect to a sensor port on the
MRX-10 (
or MRX-1
). Using URC Accelerator programming software, a
Macro can be programmed to react to the status of this sensor.
RS232M/RS232F
Available with either male or female RS-232 connectors, this cable
converts the RS-232 to a 3.5mm plug that can be connected to the
MRX-10 (
or MRX-1
) for communication.
Summary of Contents for MRX-10
Page 10: ...Application Diagram 72 ...
