WC-1 W
IRELESS
C
ONTROLLER
Rear Panel
The rear panel ports are:
DC 12V Power
: Plug in the included 12V DC 1A power supply.
IR Outputs (Ports 1-4)
: Connect an included 3.5mm IR emitter to each
of the four IR outputs. Adjust the IR output signal strength for port 1
using the attenuator located on the bottom of the unit.
LAN Connection
: If a wired connection is needed, this port uses a
standard Ethernet (RJ-45) plug to communicate via the local area
network.
Page 3
