2 / 5
3.
LED Indicator:
Color
UG Status
Event
Action
Duration
Blue
Working normally
Working
Long blink
Every minute
Blue
Low charger
voltage
Battery not
charging
Long blink
Every 2 sec.
Green
Battery charging
Battery
charging
Long blink
Every 2 sec. until battery is
fully charged
Green
Battery charged
Battery
charged
Continuous
Until battery is <100%
Red
UG turns to sleep
mode (battery
needs to be
charged)
Battery save
mode
Continuous
Battery has less than 10%
reserve (needs to be
charged)
4.
Urb-IoT Configuration
IMPORTANT: Use only the included power adapter to maintain warranty coverage and ensure correct
Urb-IoT operation
STEP 1: Charge your Urb-IoT
1)
Your Urb-IoT is in shelf-mode, it means its reporting interval is every 6h and all radios, except
cellular, OFF
2)
Connect your Urb-IoT to the power Outlet with the adapter and cable included
3)
The LED should be blinking green, in case is blinking blue, it is not charging. You may not be
using the cable and adapter included, be sure you see the green light blinking
4)
Once the LED blinks green, in 5 minutes your Urb-IoT is off shelf-mode, it means now the
reporting interval is every hour and all radios except Wi-Fi are ON.
1.
Be sure your Urb-IoT is in a place with cellular coverage, otherwise place it in a sky-view location
to ensure satellite and GPS connectivity. Urbit logo should point to the sky.
2.
When it reaches 100% battery the light stays green
STEP 2: Create your account
1)
To activate your account click the Activation link received at your registered email, you will be
requested to update the temporary password, in case you did not receive it:
Option 1: Go to
< login < Forgot Password < type the email address
registered at the purchase. You will receive an email with further instructions on how to
reset your password
Option 2: Send an email from your registered email to
information (Serial Number and registered mail)
The LED indicator is on the right
side of the Urb-IoT
